TappwaterEcoPro SMR Tap Water Filter

Tap Filter:

1. Remove Aerator: Twist off the aerator from your faucet’s spout.
2. Attach Connector: Screw the filter’s connector onto the thread of your faucet. Make sure it’s firmly seated.
3. Activate Filter: Flip the filter’s lever to switch between filtered and unfiltered water as desired.

Filter:

1. Twist the filter housing anti-clockwise to open it, remove the old cartridge, and insert a new one.
2. Screw the housing back together, then run water for 30 seconds to activate the filter.

When replacing your refill, separate the components. The plastic parts can be recycled, but the carbon block should be disposed of with regular waste, as it has absorbed contaminants.

Each refill contains a multi-stage filtration system:

• Polypropylene Mesh - Captures larger particles and some microorganisms.
• Carbon Block (Mechanical Filtration) - Removes particles larger than 1-2 microns, including microplastics, rust and bacteria.
• Activated Carbon (Chemical Adsorption) - Reduces chlorine, pesticides, herbicides, PFAS and pharmaceutical residues.
• Limescale Inhibition Technology (Polyphosphates) - Helps prevent limescale build-up.
• Metallic Mesh - Final filtration layer to capture any remaining particles.
• Swedish Mineral Rock™ - Adds essential minerals like calcium, magnesium, and potassium.

• Use only with cold water, switch to unfiltered mode for hot.
• Flush for 30 seconds if unused for several days.
• Replace filter every 3 months to keep water fresh and safe.
• Do not wash with soap, just rinse with cold water.
• Keep away from heat.

Tappwater delivers clean, great-tasting water straight from your tap. Proudly Aussie-owned, their easy-to-use filters remove over 95% of PFAS, chlorine, and microplastics, offering a sustainable, affordable alternative to bottled water for households.