Crema Joe WayCap Two Pack (Dolce Gusto®)
Created for the eco-conscious coffee lover, this Crema Joe WayCap Two Pack for Dolce Gusto® is an economic and environment-saving alternative to regular coffee capsules that usually end up in landfill. Made to be reused indefinitely, these stainless steel, reusable coffee capsules are designed to be used with all Dolce Gusto coffee machines, are easy to fill and can be rinsed clean with water. The four reusable stainless steel filters are interchangeable and each is suited to a specific grind size.
This WayCap Two Pack contains*:
2 Stainless Steel Reusable Capsules
4 Stainless Steel filters
*Coffee grounds are not included in the pack.
Designed and made in Italy.
Stainless Steel, Silicone
Before using your FeePod capsule in your coffee machine, descaling is recommended to ensure that the brewing pressure is normal and to assist with optimal performance.
Step 1. Place the strainer into the pod
To brew lungo, place convex side up. To brew espresso, concave side up. Next, place in the paper filter if brewing tea or very fine coffee grounds. The paper filter may also assist in brewing a more intense espresso.
Step 2. Fill with the capsule with coffee and tamp
Fill with one level scoop of ground coffee, using the provided scoop provided with your pack. Tamp down to the measuring line using the base of the scoop or tamper. Repeat if the tamped coffee does not reach the measuring line. Please note: Over-filling or under-filling may cause the cover to open during the brewing process.
Step 3. Click the desired steel filter into the capsule lid.
Step 4. Place the lid on the capsule.
Step 5. Place the DGpod into the capsule holder of the machine.
Align the front of the cover (where the small hole is located) with the centre of the machine's capsule holder.
If the machine lever doesn't close, double-check that you have aligned the capsule correctly.
Step 6. Adjust the water level of the machine, and brew
Please note: After brewing, wait at least 1 minute for the components to cool before pulling the capsule holder from the machine to avoid damaging the capsule cover.